This straight chromium stainless steel offers reasonable corrosion resistance and high mechanical characteristics. The 403 Series offers heat resistance and a scaling temperature of about 1300°F. It is a corrosion and heat resistant 12% Cr martensitic stainless steel. This alloy offers a wide range of mechanical properties that are obtainable by appropriate heat treatments. It is easily hardened by oil, fan or air cooling and may be tempered at temperatures of up to 1350°F (732°C) to improve fracture toughness. Oil or fan cooling is required in thicker sections
CORROSION RESISTANCE
1, High degree of resistance to atmospheric corrosion because of its ability to form a tightly adherent oxide film
2, Maximum corrosion resistance is obtained by hardening and polishing.
3, Not recommended for use in severely corrosive environments.
OXIDATION RESISTANCE
1, Resists oxidation up to 1400°F (760°C).
2, Temperature should not exceed 1200-1300°F (649-704°C) in continuous service.
HOT WORKING/HEAT TREATMENT
1,Forging or Rolling
Starting temperature between 2000°F and 2100°F is recommended for forging, with a finishing temperature recommended above 1400°F .
Final forging temperatures as low as 1300°F, if care is taken not to rupture steel
Better mechanical properties obtained in forged and tempered condition in lower temperatures
2,Annealing
May be annealed at 1500-1650°F, followed by a slow cool to 1100°F , and a final air cool.
3,Hardening
Material may be fully hardened by oil quenching from 1650-1800°F
Light sections may be hardened by air or fan cooling.
Alloy will harden, to varying degrees, when cooled from temperatures above 1500°F
TEMPERING
1,May be done at a temperature between 400°F -1400°F
2,Advisable to avoid the 800°F – 1100°F range due to a decrease in impact properties and corrosion resistance.
3,Strength and hardness decrease in the 800°F – 1100°F while ductility and toughness increase as the tempering temperature is raised.
% | Cr | Ni | C | Si | Mn | P | S | Fe |
403 | min: 11.5 | min: 0.60 | max: 0.15 | max:0.5 | max:1.0 | max:0.04 | max:0.03 | Balance |
Grade | Tensile Strength | Yield Strength 0.2% | Elongation - | Hardness |
403 | 70 | 30 | 25 | 98 |
Denstiy | Coefficient of | Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)^2-psi | |
at 68 °F | at 68 – 212°F | at 68 – 1450°F | at 200°F | at 32 – 212°F | in tension (E) |
0.276 | 5.5 | 6.6 | 9.3 | 14.4 | 29 x 10^6 |
stainless steel 446 pipes | stainless steel 316 pipes |
stainless steel 45 degree pipe | stainless steel 316 1 pipe |
stainless steel 3in pipe | stainless steel 310s pipe |
stainless steel 347 pipe | stainless steel 310s pipes |
stainless steel 321h pipes | stainless steel 310 pipes |
stainless steel 317l ap pipe | stainless steel 310 pipes suppliers |
stainless steel 316l pipes | stainless steel 304h pipes |
stainless steel 316l pipe | stainless steel 304l pipe |
We are a well known worldwide supply and export 400 Series Stainless Steel Coil in following countries:,Italy, Philippines, France,Ireland, Portugal, Gambia, Thailand, Ukraine, United Kingdom, Netherlands, South Africa, Spain, Turkey, Libya, Romania, Puerto Rico, Azerbaijan, United Arab Emirates, Pakistan, Ghana, Slovakia, Germany, Saudi Arabia, Afghanistan, Bolivia, Switzerland, Bangladesh, Taiwan, Oman, Egypt, Greece, Norway, Singapore, Bulgaria, Estonia, Belgium, Yemen, Hong Kong, Ecuador, Sri Lanka, Nepal, Belarus, Finland, Gabon, Iran, Canada, Argentina, Lebanon.