3000 Series Aluminum is alloyed with Manganese and are high strength.
3000 Series Aluminum also exhibits moderate resistance to chemical agents, atmospheric agents and offers higher mechanical properties and better formability than pure aluminium.
These alloys are not heat treatable.3000 series Aluminum alloys are Aluminum alloyed with manganese.
They have higher strength than pure aluminum while maintaining good formability and corrosion resistance.
These alloys are not heat treatable and are suitable for anodizing and welding. Alloy 3003 is the most widely used of all the aluminum alloys.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHERS | OTHERS | Al | |
| EACH | TOTAL | MIN. | ||||||||||
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | — | — | 0.1 | — | 0.05 | 0.15 | Rem. | |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | — | 0.25 | — | 0.05 | 0.15 | Rem. | |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.20-0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Rem. | |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | — | 0.25 | 0.1 | 0.05 | 0.15 | Rem. | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30-0.8 | 0.20-0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Rem. |
| Hardness, Brinell | 28.0 - 79.0 | 28.0 - 79.0 | Average value: 52.9 Grade Count:22 |
| Elongation at Break | 1.00 - 40.0 % | 1.00 - 40.0 % | Average value: 11.6 % Grade Count:44 |
| Modulus of Elasticity | 68.9 - 71.0 GPa | 9990 - 10300 ksi | Average value: 69.1 GPa Grade Count:44 |
| Compressive Yield Strength | 0.552 - 4.60 MPa | 80.0 - 667 psi | Average value: 2.05 MPa Grade Count:11 |
| Compressive Modulus | 0.110 - 1.02 GPa | 16.0 - 148 ksi | Average value: 0.460 GPa Grade Count:11 |
| Notched Tensile Strength | 110 - 303 MPa | 16000 - 43900 psi | Average value: 200 MPa Grade Count:5 |
| Poissons Ratio | 0.330 - 0.350 | 0.330 - 0.350 | Average value: 0.338 Grade Count:30 |
| Fatigue Strength | 48.3 - 110 MPa | 7000 - 16000 psi | Average value: 82.7 MPa Grade Count:10 |
| Machinability | 10.0 - 50.0 % | 10.0 - 50.0 % | Average value: 28.3 % Grade Count:12 |
| Shear Modulus | 0.0483 - 26.7 GPa | 7.00 - 3870 ksi | Average value: 14.6 GPa Grade Count:41 |
| Shear Strength | 0.310 - 180 MPa | 45.0 - 26100 psi | Average value: 71.2 MPa Grade Count:49 |
| Electrical Resistivity | 0.00000382 - 0.00000499 ohm-cm | 0.00000382 - 0.00000499 ohm-cm | Average value: 0.00000440 ohm-cm Grade Count:10 |
| THICKNESS | 0.2-600mm or as required | ||
WIDTH | 1000mm,1200mm, 1500mm or Customized | |||
Length | 100-8000mm or as required | |||
Material | 3000 series:3003,3A21 | |||
Surface Finish | Brushed,Oxidation,PS,MIRROR,Embossed,etched,color coated,etc | |||
Standard | GB, AISI, ASTM, ASME, EN, BS, DIN, JIS | |||
Application | Aluminum coils are widely used in electronics, packaging, construction, machinery, etc Widely used in Foodstuff, Gas, metallurgy, biology, electron, chemical, petroleum,boiler, nuclear energy, Medical equipment,fertilizer,pulp and paper equipment heat exchangers, machinery, dyeing equipment, film processing equipment, pipelines, exteriors of Buildings in Coastal Areas etc | |||
Package | Wooden Pallet for Strip & Coil or customized | |||
Loading Port | Tianjin or as requested | |||
Package | Wooden Pallet for Strip & Coil or customized | |||
Payment | T/T, irrevocable L/C at sight | |||
Delivery Time | 7-15 working days upon receipt of payment | |||
Trade Terms | EXW, FOB, CIF, CFR, etc | |||
Freight | by sea, air, railway, express | |||
1. Strong Corrosion Resistance 2. Excellent Weldability 3. Good conductivity
4. Strong toughness 5. Less wear and tear 6. Excellent machining properties
1.Cooking Utensils 2.Food processing 3.Food handing components4.Chemical processing 5.Chemical handing components 6.Automotive Trim
| 1050 (A91050) Aluminum | 1050A (Al99.5, 3.0255, 1B) Aluminum |
| 1060 (Al99.6, A91060) Aluminum | 1070 (Al99.7) Aluminum |
| 1070A (Al99.7(A), 3.0275) Aluminum | 1080 (Al99.8) Aluminum |
| 1080A (Al99.8(A), 3.0285, 1A) Aluminum | 1085 (Al99.85) Aluminum |
| 1100 (Al99.0Cu, A91100) Aluminum | 1100A (Al99.0Cu(A)) Aluminum |
| 1200 (Al99.0, 3.0205, 1C, A91200) Aluminum | 1230A Aluminum |
| 1235 (Al99.35, A91235) Aluminum | 1350 (E-Al99.5, EC, 3.0257, 1E, A91350) Aluminum |
| 1435 (A91435) Aluminum | 1435-H12 Aluminum |
We are a well known worldwide supply and export AA 3000 series in following countries：,Italy, Philippines, France，Ireland, Portugal, Gambia, Thailand, Ukraine, United Kingdom, Netherlands, South Africa, Spain, Turkey, Libya, Romania, Puerto Rico, Azerbaijan, United Arab Emirates, Pakistan, Ghana, Slovakia, Germany, Saudi Arabia, Afghanistan, Bolivia, Switzerland, Bangladesh, Taiwan, Oman, Egypt, Greece, Norway, Singapore, Bulgaria, Estonia, Belgium, Yemen, Hong Kong, Ecuador, Sri Lanka, Nepal, Belarus, Finland, Gabon, Iran, Canada, Argentina, Lebanon.
Product CategoriesProviding one-stop service for global customers. Complete specifications. Export to the world. Factory direct sales. Integrity management. Meet all your steel needs!
Oil & Gas
Machine Manufacturing
Marine Engineering
Construction Industry
Chemical Industry
Power Generation
