With high nickel content, Inconel Alloy 600 is virtually immune to chloride-induced stress corrosion cracking. The alloy has superb corrosion resistance to caustic environments and resistance to dry chlorine up to 538°C.
This alloy has excellent oxidation resistance up to 1093°C combined with high carburisation resistance and demonstrates good performance in high temperature nitriding environments.
It is not recommended that Inconel Alloy 600 be used at red heat temperatures where sulphur is present. It has also been found that Inconel® Alloy 600 can fall victim to stress corrosion cracking in hot, concentrated caustic alkalis, however, this can be avoided if the fabrication is fully stress relieved before use. Recommended stress relieving temperature of 982-1010 °C for 1 hour yields the best performance.
Alloy 600 can be used in a variety of applications including:
1, Heat treating muffles and retorts
2, Vacuum furnace fixtures
3, Nitriding furnaces and baskets
4, Chlorination equipment to 538°C
5, Titanium dioxide plants
% | Ni | Cr | Cu | C | Mn | Si | S | Fe |
Min | 72 | 14 | 0 | 0 | 0 | 0 | 0 | 6 |
Max | - | 17 | 0.5 | 0.15 | 1 | 0.5 | 0.015 | 10 |
Mechanical & Physical Properties | 21°C | 538°C | 649°C | 760°C | 871°C | 982°C | 1093°C |
Ultimate Tensile Strength /MPa | 641.2 | 579.2 | 448.2 | 189.6 | 103.4 | 51.7 | - |
0.2% Yield Strength /MPa | 255.1 | 196.5 | 182.7 | 117.2 | 62 | 27.6 | - |
Charpy Impact V-notch /J | 61 | 63.7 | 52.9 | 62.4 | 108.5 | 160 | - |
Coefficient of Thermal Expansion µm/m⁰C | - | 15.1 | 15.5 | 15.6 | 16.4 | - | 16.7 |
Thermal Conductivity /kcal/(hr.m.°C) | 12.8 | 19.6 | 21.3 | 19.3 | 23.8 | - | - |
Modulus of Elasticity / x105 MPa | 2.1 | 1.77 | 1.69 | 1.63 | 1.53 | - | 1.4 |
1060 alloy steel plate | 4140 alloy steel plate suppliers |
12cd4 alloy steel plate | 4140 hr alloy steel plate |
1653 alloy steel plate | 41cr4 alloy steel plate |
1060 alloy wear steel plate | 42cd4 alloy steel plate |
16mo3 alloy steel plate | 42crmo4 alloy steel plate |
34crmo4 alloy steel plate | 4340 4130 alloy steel plate |
35cd4 alloy steel plate | 4340 steel alloy plate |
8620 alloy steel plate | 520m40 alloy steel plate |
We are a well known worldwide supply and export Industrial alloys in following countries:,Italy, Philippines, France,Ireland, Portugal, Gambia, Thailand, Ukraine, United Kingdom, Netherlands, South Africa, Spain, Turkey, Libya, Romania, Puerto Rico, Azerbaijan, United Arab Emirates, Pakistan, Ghana, Slovakia, Germany, Saudi Arabia, Afghanistan, Bolivia, Switzerland, Bangladesh, Taiwan, Oman, Egypt, Greece, Norway, Singapore, Bulgaria, Estonia, Belgium, Yemen, Hong Kong, Ecuador, Sri Lanka, Nepal, Belarus, Finland, Gabon, Iran, Canada, Argentina, Lebanon.