Cold rolled steel is also part of our product portfolio. Cold rolled steel is excellent for cold forming. This product group assigned the grades DC01 to DC07, DC01EK to DC06EK, DC03ED to DC06ED and S215G to S325G. The grades are classified according to the maximum permissible yield strength and can be subdivided as follows.
DC01 – This grade can be used for simple forming work, for example Bending, embossing, beading and pulling are used.
DC03 – This grade is suitable for forming requirements such as Deep drawing and difficult profiles suitable.
DC04 – This quality is suitable for high deformation requirements.
DC05 – This thermoforming grade is suitable for higher forming requirements.
DC06 – This special deep drawing quality is suitable for the highest deformation requirements.
DC07 – This super deep drawing quality is suitable for extreme deformation requirements.
C | Mn | P | S | Al |
≤0.06 | ≤0.35 | ≤0.025 | ≤0.025 | ≥0.015 |
Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
≤180 | 270-330 | ≥40 |
carbon steel hr coil | coiled spring pin 1mm x 2 high carbon steel |
carbon steel galvanized coil | coiled spring pin 13 32 x 2 high carbon steel |
carbon steel cold rolled coil | coiled carbon steel tubing |
carbon steel coils quotes | china carbon steel coil |
carbon steel coils factory | cheap cold rolled carbon steel coil |
carbon steel coils factories | carbon steel wire coils |
carbon steel coils | carbon steel tubing coil |
carbon steel coil/plate factories | carbon steel strip coil |